Faculty Profile

Dr. Ashok Kumar Srivastava

Director - IC&CRE, Director - CSTPD, Professor & Head

PhD (IIT Kharagpur), M.Tech. (BIT Mesra), PGDTTE (AIIMS - Chennai)
M.Phil. (IIT - ISM Dhanbad), M.Sc. (NIT Jamshedpur)

  ashok.srivastava@opju.ac.in

  •  Ph.D. (Metallurgical & Materials Engineering) from IIT Kharagpur (2009).
  •  M.Tech. (New Materials & Processing Technology with Specialization in Physical Metallurgy of Steel & Composite Materials) from Birla Institute of Technology Mesra, Ranchi .
  •  Post Graduate Diploma in Teacher Training Education (PGDTTE) from All India Institute of Management Studies (AIIMS), Chennai ).
  •  M.Phil. (Applied Physics - Fuels and Mineral engineering) from IIT-ISM Dhanbad.
  •  M. Sc. (Material Science) from NIT Jamshedpur.
  •  OP Jindal University, Raigarh (C.G), Working as a Director - International Collaboration, OPJU (May 2019 - till date).
  •  OP Jindal University, Raigarh (C.G), Working as a Director - Centre for Research Excellence, OPJU (July 2017 - till date).
  •  OP Jindal University, Raigarh (C.G), Working as a Director - Steel Technology & Product Development, OPJU (July 2019 - till date).
  •  OP Jindal University, Raigarh (C.G), Working as a Professor & Head of the Department, OPJU (May 2009 - till date).
  •  OP Jindal University, Raigarh (C.G), Working as a Assistant Dean - Research, OPJU (July 2016 - June 2017).
  •  Worked as a Senior Research Fellow - Institute Research Scholar, IIT Kharagpur (Jan 2005 - May 2009).
  •  Worked as a Research Professor - Shinshu University, Nagano, JAPAN (April 2008 - March 2009).
  •  Worked as a Research Associate Cum M. Tech. Project Trainee R&D, Tata Steel Limited, Jamshedpur (Jan 2004 - Dec 2004).
  •  Synthesis and Characterization of Materials.
  •  Physical Metallurgy of Steel.
  •  Structure-property relations in materials.
  •  Composite Materials.
  •  Tribology.
  •  Corrosion.
  •  “Nanomaterials for advanced photovoltaic cells” Published in ‘Emerging Nanotechnologies for Renewable Energy (Elsevier)’ pp.239-258, 2021 DOI: https://doi.org/10.1016/B978-0-12-821346-9.00006-7, by Ashok K Srivastava, Neeraj Kumar, M. K. Phani, Pankaj Chamoli, M. K. Manoj, Ashutosh Sharma, Waqar Ahmed, and Sanjeev Kumar.
  •  “Study of Europium doped CaAl2Si2O8 Phosphor prepared by solution combustion synthesis: Optical, Fracto-Mechanoluminescence and Thermoluminescence” Published in ‘Optik-International Journal of Light and Electron Optics-Elsevier’, Vol. 226, pp.165946, 2021, by Ashok K Srivastava, R. Sharma, G. C. Mishra and S. J. Dhoble.
  •  “Strength–Ductility Trade-Off in Dual-Phase Steel Tailored via Controlled Phase Transformation” Published in ‘Journal of Materials Engineering and Performance', DOI:10.1007/s11665-020-04799-6 by Ashok K Srivastava, B Ravi Kumar, Nand Patel, Ashutosh Sharma, Byungmin Ahn.
  •  “Investigation of electrochemical corrosion behavior of additive manufactured Ti-6Al-4V alloy for medical implants in different electrolytes”, Published in ‘Journal of Alloys and Compounds (ISSN: 0925-8388)', Vol. 830, pp.154620, 2020, by Ashok K Srivastava, Ashutosh Sharma, Min Chul Oh, Jung-Taek Kim, Byungmin Ahn.
  •  “Impact of non-reactive ceria nanoparticles on the wettability and reaction kinetics between lead-free Sn-Bi and Cu pad”, Published in ‘Metals and Materials International (ISSN: 1598-9623)', https://doi.org/10.1007/s12540-019-00250-1 by Ashok K. Srivastava, Ashutosh Sharma, Kwan Lee, Byungmin Ahn, 2019.
  •  “Microstructure, mechanical and drop reliability of CeO2 reinforced Sn-9Zn composite for low temperature soldering”, Published in ‘Materials Research Express (ISSN: 2053-1591)', DOI: https://doi.org/10.1088/2053-1591/ab0225 by Ashok K Srivastava, Ashutosh Sharma, Byungmin Ahn, 2019.
  •  “Wear study of Chicken Eggshell-Reinforced Al6061 Matrix Composites”, Published in ‘Transactions of the Indian Institute of Metals (ISSN: 0975-1645)', https://doi.org/10.1007/s12666-018-1463-0 by Ashok K Srivastava, Surendra Kumar Dwiwedi, Manoj Kumar Chopkar.
  •  “An Overview of Fatigue Strength of Case-Hardening TRIP-Aided Martensitic Steels”, Published in ‘Metals (ISSN: 2075-4701)’, Vol.8, pp355, 2018 by Ashok Kumar Srivastava, Koh-ichi Sugimoto and TomohikoHojo.
  •  “Template-Assisted Fabrication of Nanostructured Tin (β-Sn) Arrays for Bulk Microelectronic Packaging Devices”, Published in ‘Metals (ISSN: 2075-4701)’, Vol.8, pp347, 2018 by Ashok Kumar Srivastava, Ashutosh Sharma, Yongho Jeon and ByungminAhn.
  •  “Microstructural and mechanical characterization of Chicken Eggshell-reinforced Al6061 Matrix Composites”, Published in ‘Open Journal of Metals (ISSN: 2164-2761)’, Vol.8, pp1-13, 2018 by Ashok Kumar Srivastava, Surendra Kumar Dwiwedi, Manoj Chopkar and Koh-ichi Sugimoto.
  •  “Study of Lyoluminescence of gamma-irradiated GdCa4O(BO3)3:Ce phosphors: Mass of solute and pH of solvent as a key factor”, Published in ‘Optik (ISSN: 0030-4026)’, Vol.158, pp826-830, 2018 by Ashok Srivastava, G.C. Mishra, S. J. Dhoble, Surendra Dwiwedi and R. S. Kher.
  •  “Advances in Joining and Welding Technologies for Automotive and Electronic Applications”, Published in ‘American Journal of Materials Engineering and Technology (ISSN: 2333-8903)’, Vol. 5, No. 1, pp7-13, 2017 by Ashok Kumar Srivastava and Ashutosh Sharma.
  •  “Microstructure and Mechanical Properties of a TRIP-aided Martensitic Steel”, Published in Published in ‘Metallography, Microstructure and Analysis (ASM International) (ISSN: 2192-9270)’, Vol. 4 (2015) pp.344–354 by Ashok Kumar Srivastava and Koh-ichi Sugimoto.
  •  “Corrosion Behavior of TiC and (Ti,W)C-Reinforced Fe-17Mn and Fe-17Mn-3Al Austenitic Steel Matrix In Situ Composites”, Published in ‘Metallography, Microstructure and Analysis (ASM International) (ISSN: 2192-9270)’, Vol. 4 (2015) pp.371–380 by Ashok Kumar Srivastava, Karabi Das, Sandeep Kr. Toor and Koh-ichi Sugimoto.
  •  “Corrosion behaviour of TiC-reinforced Hadfiled Manganese Austenitic Steel matrix in-situ composites”, Published in ‘Open Journal of Metals (ISSN: 2164-2761)’, Vol. 5 (2015) pp.11-17 by Ashok Kumar Srivastava, Karabi Das, Sandeep Kumar Toor.
  •  “Experimental investigation of the effect of Working Parameters on Wire Offset in Wire Electrical Discharge Machining of Hadfield Manganese Steel” Published in ‘Journal of Surface Engineered Materials and Advanced Technology (ISSN: 2161-4881)’, Vol. 3 (2013) pp.295-302 by Ashok Kumar Srivastava, Surya Kanta Pal, ProbirSaha and Karabi Das..
  •  “Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composites through Neuro-Genetic technique”, Published in ‘Applied Soft Computing (ISSN: 1568-4946)’, Vol. 13 (2013) pp.2065-2074 by Ashok Kumar Srivastava, Karabi Das, ProbirSaha, DebashisTarafdar, Surjya K. Pal and ParthaSaha.
  •  “In Situ Synthesis, Microstructure, and Properties of TiC and (Ti,W)C-Reinforced Fe-Mn-Al Austenitic Steel Matrix Composites”, Published in ‘Journal of Materials Engineering and Performance (ISSN: 1059-9495)’, Vol. 21 (2012) pp.2438-2445 by Ashok Kumar Srivastava and Karabi Das.
  •  “The abrasive wear resistance of TiC and (Ti,W)C-reinforced high manganese austenitic steel matrix composites”, Published in ‘Tribology International (ISSN: 0301-679X)’, Vol. 43 (2010) pp.944-950 by Ashok Kumar Srivastava and Karabi Das.
  •  “Modeling of wire-electro-discharge machining of TiC/Fe in-situ metal matrix composite using normalized RBFN with enhanced k-means clustering technique”, Published in ‘International Journal of Advanced Manufacturing Technology (ISSN: 0268-3768)’, Published in Vol. 43 (2009) pp.107-116 Ashok Kumar Srivastava, Karabi Das, ProbirSaha, DebashisTarafdar, Surjya K. Pal and ParthaSaha.
  •  “In-situ Synthesis and Characterization of TiC-reinforced Hadfield Manganese Austenitic Steel Matrix Composite”, Published in ‘ISIJ International (ISSN: 0915-1559)’, Vol. 49 (2009) pp.1372-1377 by Ashok Kumar Srivastava and Karabi Das.
  •  “Microstructural and mechanical characterization of in situ TiC and (Ti,W)C-reinforced high manganese austenitic steel matrix composites”, Published in ‘Materials Science and Engineering A (ISSN: 0921-5093)’, Vol. 516 (2009) pp.1-6 by Ashok Kumar Srivastava and Karabi Das.
  •  “Microstructure and abrasive wear study of (Ti,W)C-reinforced high manganese austenitic steel matrix composite”, Published in ‘Materials Letter (ISSN: 0167-577X)’, Vol. 62 (2008) pp.3947-3950 by Ashok Kumar Srivastava and Karabi Das.
  •  “Microstructural characteristics of Hadfield austenitic manganese steel”, Published in ‘Journal of Materials Science (ISSN: 0022-2461)’, Vol. 43 (2008) pp.5654-5658 by Ashok Kumar Srivastava and Karabi Das.
  •  “Microstructural and Mechanical characterization of C-Mn-Al-Si cold-rolled TRIP-aided Steel”, Published in ‘Material Science and Engineering A (ISSN: 0921-5093)’, Vol. 445-446 (2007) pp.549–557 by Ashok Kumar Srivastava, D. Bhattachrjee, G. Jha, N. Gope and S. B. Singh.
  •  “Effect of heat treatment on microstructure and mechanical properties of cold rolled C-Mn-Si TRIP-aided steel”, Published in ‘Materials Characterization (ISSN: 1044-5803)’, Vol. 57 (2006) pp.127-135 by Ashok Kumar Srivastava, G. Jha, N. Gope and S. B. Singh.
  •  “High Strength Steels for Automotive applications: Recent Trends and Experience at Tata Steel”, Published in ‘International Society of Automotive Engineers’, (2005) pp.201-211 by Ashok Kumar Srivastava, N. Gope, G. Jha, D. K. Rout, S. Mukherjee, A. N. Bhagat, A. K Verma and D. Bhattacharjee.
  •  “Effect of Different Aqueous Electrolytes on Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy”, Presented in ‘TMS Annual Meeting and Exhibition 2019' to be held on March 10-14, 2019 held at San Antonio, USA.
  •  "Participated in the International Exhibition and Conference "INDIA STEEL 2019", organized by Ministry of Steel, Government of India and Federation of Indian Chambers of Commerce and Industry (FICCI) held at Mumbai, during January 22-24, 2019.
  •  “Weldability Assessment of Advanced High Strength Steel (YS>650 Mpa) Produced through CSP route” accepted in ‘ASIA Steel International Conference (ASIA Steel 2018)’ to be held on Feb 6-9, 2018 at Hotel Mayfair, Bhubaneswar, India by Ashok K Srivastava, P K Patra and Srimanta Sam.
  •  “Development of a hot rolled Ultra high strength steel with YS >700 MPa through CSP route by optimizing coiling temperature” accepted in ‘ASIA Steel International Conference (ASIA Steel 2018)’ to be held on Feb 6-9, 2018 at Hotel Mayfair, Bhubaneswar, India by Ashok K Srivastava, P K Patra, S Sam, Sujoy S Hazra and Srinivas Rao Bakshi.
  •  “Ferrite Channel Effect on Ductility and Strain Hardenability of High Strength Dual Phase Steel” presented in ‘Third International Conference on "Advance in Steel, Power and Construction Technology’ held on March 22-23, 2017 at Raipur organized by OPJU, JSPL Raigarh by Ashok K Srivastava, Nand Patel and B Ravi Kumar.
  •  “EFFECT OF HYDROGEN EMBRITTLEMENT ON FRACTURE TOUGHNESS OF API GRADE STEEL- A REVIEW” presented in ‘Third International Conference on "Advance in Steel, Power and Construction Technology’ held on March 22-23, 2017 at Raipur organized by OPJU, JSPL Raigarh by Ashok K Srivastava, and Manish Pandey.
  •  “Conventional melting and casting of carbide-reinforced austenitic steel matrix in-situ composites”, presented (Keynote) in ‘The National Conference on Emerging Technologies in Foundry and Forge (NCETFF 2016)’ held on November 25-26, 2016 at NIFFT Hatia, Ranchi.
  •  “Morphological and Mechanical Characterization of Low Alloy TMT Steel with Dual Phase” presented in ‘International Conference on Advance in Steel, Power and Construction Technology’ held on January 14-16, 2015 at OPJU, JSPL Raigarh by Ashok K Srivastava, CB Singh, AnkitaGoyal, Ajay Kumar and Naman Kumar.
  •  “Preparation and Characterization of Polyaniline (PANI) – Platinum Nanocomposite” presented in International Conference (International Scholarly and Scientific Research & Innovation) held on February 26-27, 2015 at Dubai, UAE by Ashok K Srivastava, Neeraj Kumar and Ranjan Haldar.
  •  “Pancaking in Cold Rolled Al-Killed Low Carbon Extra Deep Drawing Steel”,presented in ‘International Conference on "Advance in Steel, Power and Construction Technology’ held on January 14-16, 2015 at OPJU, JSPL Raigarh by Ashok K Srivastava, R Haldar, AkashSoni and G Sahu.
  •  “Failure Analysis of Shear Blade of Wire Rod Mill” presented in ‘International Conference on Metallurgical and Materials Processes, Products and Applications’ held on January 8-10, 2014 at OPJIT, JSPL Raigarh, India by A. K. Srivastava, PN Choubey, Anil Verma, Souvik Das and PS Mandley.
  •  “Investigating the Machinability Evaluation of Austenitic Hadfield Steel in the Wire-Electrical Discharge Machine (WEDM) based on the effect of Working Parameters on Cutting Speed” presented in ‘International Conference on Metallurgical and Materials Processes, Products and Applications’ held on January 8-10, 2014 at OPJIT, JSPL Raigarh, India by Ashok K Srivastava.
  •  “Modelling of heat flow path during heat transfer in heat conductive hyperbolic metallic surface” Presented in ‘AMPT 2012’ held on September 23-26, 2012 at Wollongong, Australia by Ashok Kumar Srivastava and Deepak Dwivedi.
  •  “The abrasive wear resistance of TiC and (Ti,W)C-reinforced austenitic high manganese steel matrix in situ composites” presented in ‘2nd International Conference on Advanced Tribology 2008 (iCAT 2008)’, held on December 3-5, 2008 at NUS Singapore by Ashok Kumar Srivastava and Karabi Das.
  •  “Microstructural study of (Ti,W)C-reinforced high manganese austenitic steel matrix composite”, presented in ‘INCCOM-VI’, held on December 12-14, 2007 at IIT Kanpur, India by Ashok Kumar Srivastava and Karabi Das.
  •  “In situ synthesis and characterization of TiC-reinforced steel matrix composite”, presented in ‘International conference on Advanced Materials and Composites (ICAMC-2007)’, held on October 24-26, 2007 at RRL Trivandrum, India by Ashok Kumar Srivastava and Karabi Das.
  •  “An Advanced high strength steel (TRIP-aided steel) for automotive car body: An Overview”, presented in ‘INCCOM-IV’, held on December 5-7, 2005 at Amrita Engineering College, Coimbatore, India by Ashok Kumar Srivastava, G. Jha and N. Gope.
  •  “Thermodynamic equilibrium calculations of cold-rolled TRIP-aided steel by Thermo-Calc Software”, presented in ‘International Conference on Advances in Materials and Materials Processing (ICAMMP-2006)’ held on February 3-5, 2006 at IIT Kharagpur, India by Ashok Kumar Srivastava, G. Jha and N. Gope.
  •  “Nondestructive evolution for steel and allied industries” presented in ‘NDESAI 2011’ held on December 2-3, 2011 at SNTI Auditorium, Tata Steel Limited, Jamshedpur, India by Ashok Kumar Srivastava and Parag R Bansal.
  •  “Review on Higher Engineering Education System in India” presented in ‘National Conference on Globalization of Indian Engineering Education’ held on October 14-15, 2011 at OPJIT, JSPL Raigarh by Ashok K Srivastava.
  •  “A comparative study between different process parameters of WEDM in machining of TiC-reinforced austenitic steel matrix composites” presented in ‘NMD-2010’ held on November 14-16, 2010 at IISC Bangalore, India by Ashok Kumar Srivastava and Karabi Das.
  •  “Innovative Methods for Quality Enhancement in Technical Education” presented in ‘National Conference on Technical Education’ held on October 8-9, 2010 at OPJIT, JSPL Raigarh by Ashok K Srivastava.
  •  “Wear behaviour of carbide reinforced austenitic manganese steel matrix composites”, presented at ‘NMD 2007’, held on November 14-16, 2007 at BARC Mumbai by Ashok Kumar Srivastava and Karabi Das.
  •  “Refractories for Steelmaking: Fundamentals and new trends”, presented in ICS 2007 held on September 25-26, 2007 at Centre for Excellence, Tata Steel Limited Jamshedpur organized by Indian Ceramic Society, Jamshedpur Chapter.
  •  “Synthesis and Characterization of in situ TiC-reinforced Hadfield manganese steel composite”, presented in ‘NMD 2006’, held on November 14-16, 2006 at Tata Steel Limited, Jamshedpur, India by Ashok Kumar Srivastava and Karabi Das.
  •  “Application of Optical and Electron Microscopy in the characterization of Steel”, presented in ‘NCEAAP-SS 2004’ held on February 21-23, 2004 at Indian School of Mines, Dhanbad by Ashok Kumar Srivastava, P. K. Barhai.
  •  “To evaluate the Surface Roughness by the use of Laser Speckle”, presented in ‘NLS-2003’ held on December 22-25, 2003 at Indian Institute of Technology, Kharagpur, India by Ashok Kumar Srivastava, H. L. Yadav, and A. Mallick.
  •  “A Brief Review on Laser Induced Plasma”, presented in ‘PLASMA-2003’ held on December 8-11, 2003 at Birla Institute of Technology, Mesra, Ranchi, India by Ashok Kumar Srivastava, A. Mallick, P. K. Singh and G. P. Singh.
  •  “Surface Coating by Plasma Nitriding”, presented in ‘PLASMA-2003’, held on 8-11 December, 2003 at Birla Institute of Technology, Mesra, Ranchi, India by Ashok Kumar Srivastava, A. Mallick, P. K. Singh and G. P. Singh.
  •   Participated in two week ISTE Workshop on Pedagogy of Engineering Education conducted by IIT Bombay under National Mission on Education through ICT (MHRD) during January 5-24, 2015, 2015.
  •  5-Days International Steel Academy Course (Fundamental Principles – Practical Knowledge) at SAIL Bhilai Steel Plant, Bhilai, India organized by Association for Iron & Steel Technology (AIST), USA during 16-20 January, 2015.
  •  Participated in two week ISTE Workshop on Fluid Mechanics conducted by IIT Kharagpur under National Mission on Education through ICT (MHRD) during May 20-30, 2014.
  •  5-Days International Steel Academy Course at Jindal Steel & Power Limited, Raigarh, India organized by Association for Iron & Steel Technology (AIST), USA during 9-13 December, 2013.
  •  6-Months Characterization Laboratory training during M. Tech. at “Research & Development for Iron & Steel Company, Steel Authority of India Limited, Ranchi, India”.
  •  One Week training during M. Tech. Project thesis on “Hot rolling and Cold rolling Technology” at “Research & Development for Iron & Steel Company, SAIL, Ranchi, India”.
  •  One Day training on “Thermo-mechanical Simulator Gleeble-1500” at “Research & Development, Tata Steel Limited, Jamshedpur, India”..
  •  One Week laboratory exposure training on “Melting, Casting and Forging of Steel” at “Research & Development, Tata Steel Limited, Jamshedpur, India”.
  •  One Day workshop on “New Generation Ceramic Fiber Material” organized by “Indian Ceramic Society & NML, Jamshedpur, India”.
  •  One Week short-term course on “Internetworking” at G. S. Sanyal School of Telecommunication, “Indian Institute of Technology, Kharagpur, India”.
  •  One Day short term course on “Machinery Condition based Maintenance and Failure Analysis” at The Park, Kolkata, organized by “Department of Mechanical Engineering, IIT Kharagpur”.
  •  Three Days short term training on “Advanced Microstructural Characterization of Wear Tested Materials” held on 3-5 December, 2008 at “Minerals, Metals and Materials Technology Centre”, National University Singapore, Singapore.
  •  One Week DST sponsored SERC school on “Texture and microstructure” scheduled during 24 to 30th March 2008 at IISC Bangalore, India.
  •  Chaired a plenary session in “International Conference on Advances in Steel, Power and Construction Technology (ICASPCT 2016)” at OP Jindal University, Raigarh, India during March 17-19, 2016.
  •  Chaired two sessions in “Behind the Teacher’s Desk (BTTD 2015)” at CSIR-NML, Jamshedpur during April 9-10, 2015.
  •  Chaired a plenary session in “International Symposium on Advanced Mechatronics Engineering (7th ISAME) at CECO, Changwon, Korea during January 9-11, 2013.
  •  Association for Iron and Steel Technology (AIST), USA.
  •  The American Ceramic Society (ACerS), USA.
  •  ASM International (ASM), USA.
  •  The Minerals, Metals and Materials Society (TMS), USA.
  •  Indian Society for Technical Education (ISTE), New Delhi, India.
  •  Indian Institute of Metal, Kolkata, India.
  •  Indian Ceramic Society, Kolkata, India – Associate Member.
  •  Editorial Board Member of “Modern Electronic Technology”, an international journal.
  •  Editorial Board Member - Materials Sciences and Applications, Scientific Research Publishing.
  •  Reviewer - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, Elsevier.
  •  Reviewer - Journal of the European Ceramic Society.
  •  Reviewer - Materials Characterization, Elsevier.
  •  Reviewer - Journal of Materials Science and Chemical Engineering(MSCE), Scientific Research Publishing.
  •  Reviewer - Materials Sciences and Applications (MSA), Scientific Research Publishing.
  •  Delivered a Guest Lecture on “Sponge iron for making primary steel products” in Bhusan Steel & Power Limited, Jharsuguda, India on March 5, 2016.
  •  Delivered a Guest Lecture on “Uses of Mild Steel and High Tensile Steel in Power Sector” in Monnet Ispat & Power Limited, Raigarh on April 2, 2016.
  •  Delivered a keynote lecture on “Wear behaviour of TiC-reinforced metal matrix composites” in workshop on “Fundamentals of Tribotesters and its selection matrix” at Ducom Instruments, Bangalore during November 23-27, 2015.
  •  Delivered a keynote lecture on “High-strength Steels for Automotive Application” in ‘Behind the Teacher’s Desk (BTTD 2015)’ at CSIR-NML, Jamshedpur during April 9-10, 2015.
  •  Delivered a Guest Lecture on “Super Reinforced Ceramics Composites & Ceramite Applications in Iron & Steel Industries” in the seminar organized by IIM, Raigarh Chapter on September 15, 2014.
  •  Delivered a Guest Lecture on “Metal Matrix Composites Application in Automotive Industry” in the seminar organized by IIM, Raigarh Chapter on July 17, 2014.
  •  Delivered a keynote lecture on “Synthesis and characterization of TiC-reinforced Hadfield austenitic manganese steel” in ‘International Symposium on Advanced Mechatronics Engineering (7th ISAME)’ at CECO, Changwon, Korea during January 9-11, 2013.
  •  Appointed as the Member of the Core Group on Welding Technology by Confederation of Indian Industry (CII) for the year 2021-22, which functions under the aegis of CII Naoroji Godrej Centre of Manufacturing Excellence in Mumbai, INDIA.
  •  Appointed as the Chairman, Eastern Region of India, ASM International USA.
  •  Appointed as an Evaluator by the National Accreditation Board for Education and Training (NABET)-Quality Council of India (QCI), Government of India for the Impacting Research, Innovation and Technology (IMPRINT-IMPRINT I/ IMPRINT II/UAY) projects supported by MHRD (Joint initiative of Pan-IIT + IISc).
  •  Appointed as an Expert for Infollion Expert Panel (IEP) in the Metallurgy Industry Domain by Infollion Research Services Pvt Ltd, Haryana, INDIA and Milwaukee, USA.
  •  Appointed as the Chairman, Board of Studies, Metallurgical Engineering, Chhattisgarh Swami Vivekananda Technical University (CSVTU), Bhilai (CG).
  •  Appointed as an Advisor for Technical and Business Development in the Metcon Power Consultant and Engineers, Hooghly, West Bengal.
  •  Appointed as an Advisor for Business Development and Operation Strategy in the Raj IT Solution Private Limited, Jaipur, Rajasthan.
  •  Appointed as an Advisor for Strategy in the Tuls Corp Private Limited, Mumbai.
  •  Acted as a Member, Academic Council, CSVTU, Bhilai (C.G.).
  •  Implemented at OPJU the innovative learning mechanisms and various e-teaching/learning models like: MOOCs, Intranet, Blended Teaching, Flipped Classrooms, Moodle etc.
  •  Research Publications (h-index: 11, i10-index: 11 and total citations > 625).
  •  Evaluated 02 PhD thesis, guided 01 PhD Scholar and guiding at present 03 PhD Scholars.
  •  Evaluated 15, Guided 06 and guiding at present 02 M. Tech thesis.
  •  Acting as the reviewer of many journals, some important journals are: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, Elsevier; Journal of the European Ceramic Society; Materials Characterization, Elsevier; Journal of Materials Science and Chemical Engineering (MSCE); · Metals and Materials International; Journal of alloys and compounds.
  •  Appointed as a member of the Editorial Board in the international journals: Materials Sciences and Applications, Scientific Research Publishing; Modern Electronic Technology, Bilingual Publishing Co.
  •  Organized 06 international conferences with 350-375 Indian (325-350) & Foreign (25-50) delegates and 06 national conferences with 425-450 delegates
  •  Awarded by Editor's Choice Article for 2015 by the international journal “Metallography, Microstructure, and Analysis”, ASM International, Springer.
  •  Awarded PhD in Metallurgical and Materials Engineering from IIT Kharagpur with two sponsored research projects funded by Naval Research Board of India.
  •  Best Teacher Award at OP Jindal Institute of Technology (Now it is OP Jindal University) for continuously 3 years (2011, 2012 & 2013).
  •  Awarded best M Tech Project thesis.
  •  Awarded First Class with Distinction in M. Phil. Program.
  •  Awarded 2nd rank in the University and 1st rank in the NIT Jamshedpur in M Sc Program.
Digital Initiatives :                                                        
Admission Open 2024 - 25