PUBLICATION

 Makade, R. G., Chakrabarti, S., & Jamil, B. (2020). Real-time estimation and prediction of the mortality caused due to COVID-19 using particle swarm optimization and finding the most influential parameter. Infectious Disease Modelling, 5, 772-782.

 Makade, R. G., Chakrabarti, S., Jamil, B., & Paswan, M. K. (2020). Prediction of global solar radiation in India: analysing the influence of variable input parameter (VIP) on the model’s output performance. International Journal of Ambient Energy, 1-20.

 Vaseer, G. (2020, July). Multi-Attack Detection using Forensics and Neural Network based Prevention for Secure MANETs. In 2020 11th International Conference on Computing, Communication and Networking Technologies (ICCCNT) (pp. 1-6). IEEE.

 Bhandarkar, L. R., Behera, M., Mohanty, P. P., & Sarangi, S. K. (2021). Experimental investigation and multi-objective optimization of process parameters during machining of AISI 52100 using high performance coated tools. Measurement, 172, 108842.

 Biswal, S., Swain, S. D., Patidar, R. D., Bhoi, A. K., & Malik, O. P. (2021). Integrated Wide-Area Backup Protection Algorithm During Stressed Power System Condition in Presence of Wind Farm. Arabian Journal for Science and Engineering, 1-14.

 Chaturvedi, V., & Talapaneni, T. (2021). Effect of Mechanical Vibration and Grain Refiner on Microstructure and Mechanical Properties of AZ91Mg Alloy during Solidification. Journal of Materials Engineering and Performance, 30(5), 3187-3202.

 Biswal, S., Tajdinian, M., Adly, A. R., Patidar, R. D., Bhoi, A. K., & Rathore, N. S. (2021). Kullback‐Leibler divergence based differential protection scheme for shunt compensated transmission line. IET Generation, Transmission & Distribution, 15(12), 1808-1819.

 Makade, R. G., Chakrabarti, S., & Jamil, B. (2021). Development of global solar radiation models: A comprehensive review and statistical analysis for Indian regions. Journal of Cleaner Production, 126208.

 Chakrabarti, S., Yadav, S., & Bose, P. A systematic approach in power plant performance improvement through exergy analysis-A case study. International Journal of Energy for a Clean Environment.

 Hussain, M. I., Hussain, M., Gupta, A., & Ahmad, G. N. (2021). Experimental Investigation and Comparative Study of Sintering of Microcrystalline Nickel Using Microwave and Conventional Method. Arabian Journal for Science and Engineering, 1-15.

 Bandhu, K. C., & Bhansali, A. (2020, December). Comparison of Transmission Control Protocol Variants for Two Way Transfer and Propagation Model with WiMAX Network Bandwidth Asymmetry. In 2020 5th IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE) (pp. 1-5). IEEE.

 Kumar, N., Phani, M. K., Chamoli, P., Manoj, M. K., Sharma, A., Ahmed, W., ... & Kumar, S. (2021). Nanomaterials for advanced photovoltaic cells. Emerging Nanotechnologies for Renewable Energy, 239-258.

 Singh, J. K., Rout, A. K., & Kumari, K. (2021). A review on Borassus flabellifer lignocellulose fiber reinforced polymer composites. Carbohydrate Polymers, 117929.

 Saini, N., Masih, J., Bansali, A., & Rajsekaran, R. (2020). Global Public Sentiment About “Use Of Drones” To Fight Covid-19 Pandemic. Solid State Technology, 9415-9433.

 Gautam, A., Komal, P., Singh, R. S., Gautam, P., Manjari, S. K. V., & Ningthoujam, R. S. (2021). Hard core proof of the polyvinyl alcohol as a reducer for the formation of gold nanoparticles. Journal of Molecular Liquids, 334, 116112.

 Kadam, A. R., Kohale, R. L., Mishra, G. C., & Dhoble, S. J. (2021). Eu (iii)-Doped tri-calcium Ca 3 (1− X− Z) MZ (PO 4) 2 AX: X host array: optical investigations of down-conversion red phosphor for boosting display intensity and high color purity. New Journal of Chemistry, 45(16), 7285-7307.

 Singh, R. S., Rasheed, A., Gautam, A., Singh, A. K., & Rai, V. (2021). Enhanced Optical and Electrical Properties of Graphene Oxide-Silver Nanoparticles Nanocomposite Film by Thermal Annealing in the Air. Russian Journal of Applied Chemistry, 94(3), 402-409.

 Bhandarkar, L. R., Goswami, N. K., Behara, M. K., Mohanty, P. P., & Sarangi, S. K. (2021, May). Investigation and modeling of process parameters during the machinability study of AISI 52100 using advanced coated and uncoated tools. In AIP Conference Proceedings (Vol. 2341, No. 1, p. 040021). AIP Publishing LLC.

 Mahamaya, M., Das, S. K., Reddy, K. R., & Jain, S. (2021). Interaction of biopolymer with dispersive geomaterial and its characterization: An eco-friendly approach for erosion control. Journal of Cleaner Production, 127778.

 Bhandarkar, L. R., M. Behera, P. P. Mohanty, and S. K. Sarangi. "Experimental investigation and multi-objective optimization of process parameters during machining of AISI 52100 using high performance coated tools." Measurement 172 (2021): 108842.

 Biswal Sandeep, Sushree Diptimayee Swain, Ram Dayal Patidar , Akash Kumar Bhoi, and Om Parkash Malik. "Integrated Wide-Area Backup Protection Algorithm During Stressed Power System Condition in Presence of Wind Farm." Arabian Journal for Science and Engineering: 1-14.

 Makade, Rahul G., Siddharth Chakrabarti, and Basharat Jamil. "Development of Global Solar Radiation Models: A Comprehensive Review and Statistical Analysis for Indian Regions." Journal of Cleaner Production (2021): 126208.

 Sandeep Biswal, Mohsen Tajdinian, Ahmed. R. Adly, Ram Dayal Patidar, Akash Kumar Bhoi, Natwar Singh Rathore, “Kullback-Leibler Divergence Based Differential Protection Scheme for Shunt Compensated Transmission Line”, IET Generation, Transmission & Distribution, 2020, 1-12.

 Makade Rahul, Chakrabarti Siddharth, Jamil, Basharat, “Development of Global Solar Radiation Models: A Comprehensive Review and Statistical Analysis for Indian Regions”, Journal of Cleaner Production, 293, 2021, 10.1016/j.jclepro.2021.126208.

 Bandhu, K. C., & Bhansali, A. (2020, December). Comparison of Transmission Control Protocol Variants for Two Way Transfer and Propagation Model with WiMAX Network Bandwidth Asymmetry. In 2020 5th IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE) (pp. 1-5). IEEE.

 Kumar, N., Phani, M. K., Chamoli, P., Manoj, M. K., Sharma, A., Ahmed, W., ... & Kumar, S. (2021). Nanomaterials for advanced photovoltaic cells. Emerging Nanotechnologies for Renewable Energy, 239-258.

 Sushree Diptimayee Swain, Ray and Pravat Kumar "Performance enhancement of shunt active power filter with the application of an adaptive controller." IET Generation, Transmission & Distribution 14, no. 20 (2020): 4444-4451.

 Mahesh Bhiwapurkar and Prakash Sen, Rolling Contact Fatigue Behavior of Rail Weldments Under Various Load Conditions: In Indian Railways Aspect, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 2020

 Sahu, Pradip Kumar Gunji Balamurali, and Bibhuti Bhusan Biswal. "Robotic manipulator trajectory optimisation using an improved modified bat algorithm." International Journal of Mechatronics and Automation 7, no. 1 (2020): 11-22.

 Chakrabarti, Sidharth Sudhansu, Akash Pandey, and Pratik Dhage. "A systematic approach for a better thermal management of photovoltaic systems-A review." Journal of Computational & Applied Research in Mechanical Engineering (JCARME) 10, no. 1 (2020): 1-24.

 Siddharth Chakrabarti, Makade, Rahul G., Basharat Jamil, and C. N. Sakhale. "Estimation of global solar radiation for the tropical wet climatic region of India: A theory of experimentation approach." Renewable Energy 146 (2020): 2044-2059.

 Kumar, Neeraj and M. K. Manoj. "Influence of B 4 C on Dry Sliding Wear Behavior of B 4 C/Al–Mg–Si Composites Synthesized via Powder Metallurgy Route." Metals and Materials International (2020): 1-12.

  Siddharth Chakrabarti, Makade, Rahul G., and Basharat Jamil. "Real-time estimation and prediction of the mortality caused due to COVID-19 using particle swarm optimization and finding the most influential parameter." Infectious Disease Modelling 5 (2020): 772-782.

 Siddharth Chakrabarti, Makade, Rahul G., Basharat Jamil, and Mani Kant Paswan. "Prediction of Global Solar Radiation in India: Analyzing the Influence of Variable Input Parameter (VIP) on the Model’s Output Performance." International Journal of Ambient Energy (2020): 1-41.

 Vaseer, Gurveen "Multi-Attack Detection using Forensics and Neural Network based Prevention for Secure MANETs." In 2020 11th International Conference on Computing, Communication and Networking Technologies (ICCCNT), pp. 1-6. IEEE, 2020.

 Prasad EV, Sivateja C, Sahu SK. Effect of nanoalumina on fatigue characteristics of fiber metal laminates. Polymer Testing. 1;85:106441 2020.

 Prasad EV, Sahu SK. Buckling of fiber metal laminated plates–numerical and experimental studies. Aircraft Engineering and Aerospace Technology, 2020.

 S. Biswal, M. Tajdinian, M. Allahbakhshi, O. P. Malik and D. Behi, “Study of the Impact of Switching Transient Over-voltages on Ferro-Resonance of CCVT in Series & Shunt Compensated Power Systems,” IEEE Transactions on Industrial Informatics. vol. 16, no. 8, pp. 5032-5041, Aug 2020.

 S. Biswal, S. Akter, N. S. Rathore, P. Das, and A. Y. Abdelaziz “Amplitude Based Directional Relaying Scheme For Transmission Line During Single Pole Tripping,” Electric Power System Research, vol. 184, July 2020.

  S. Biswal , M. Biswal, “Detection of current transformer saturation phenomenon for secured operation of smart power network,” Electric Power System Research, vol. 175, 2019, pp.362-371 2019.

 Ashok Kumar Srivastava, Ashutosh sharma., M.C. Oh, T.J. Kim & B. Ahn, Investigation of electrochemical corrosion behavior of additive manufactured Ti–6Al–4V alloy for medical implants in different electrolytes. Journal of Alloys and Compounds, 2020, 154620..

 Ashok Kumar Srivastava, Nand Patel, B. Ravi Kumar, Ashutosh Sharma, B. Ahn, "Strength - Ductility trade off in dual phase steel tailored via controlled phase transformation", Journal of Materials Engineering and Performance, 2020 (Accepted).

 Ashok Kumar Srivastava, Ashutosh Sharma, Kwan Lee, Byungmin Ahn, Impact of Non-Reactive Ceria Nanoparticles on the Wettability and Reaction Kinetics Between Lead-Free Sn–58Bi and Cu Pad, 2019 (Accepted) Springer.

 P. S. Bokare, A. K. Maurya, S. Gokhle, Effect of Speeding Behaviour of Passenger Cars on Tailpipe Emissions, Transportation Research Procedia, 2018 (Article is online), Elsevier.

 M. K. Phani, C. Ma, V. Pfahl, Z. Wang, Y. Chen, J. Chu, A. Kumar, W. Arnold, and K. Samwer , “Stick-to-Sliding Transition in Contact-Resonance Atomic Force Microscopy”, Applied Physics Letters, 113, 083102(1-4), 2018.

 Siddharth S Chakrabarti, P K Das and Indranil Ghosh, Thermal Behavior of Wet Porous and Solid fin–Experimental and Analytical Approach, International Journal of Mechanical Sciences, 2018 (Accepted) Elsevier.

 L. R. Bhandarkar, V. Singh, "Thermodynamic analysis of gas turbine power plant based on energy and entropy analysis", International Journal of Recent Scientific Research Research Vol. 9, Issue, 7(B), pp. 27793-27796, July, 2018.

 Jitesh Kr Singh, A. K. Rout, "An overview of Advanced Fiber Reinforced Polymer Composites and Its Application", International Journal of Mechanical and Production Engineering Research and Development, Vol.8, No.5, PP.311-318, Sept. 2018.

 Jitesh Kr Singh, A. K. Rout, "Advances in Green Steel Making Technology-A Review", American Journal of Materials Engineering and Technology, Vol. 6, No. 1, PP. 8-13, July, 2018.

 Jitesh Kr Singh, A. S. Bais, "Electricity Generation by Airfoil Design Vertical Axis Wind turbine Vol. 8, No. 6, PP.34-42, July, 2018.

 Ashok Kumar Srivastava, Koh-ichi Sugimoto, Tomohiko Hojo, “An Overview of Case-Hardening TRIP-Aided Martensitic Steels”, MDPI Open Journal ​​“Metals (ISSN 2075-4701)"​, Vol.8 (5), 355, 2018.

 Ashok Kumar Srivastava Byungmin Ahn, Ashutosh Sharma, “Template-assisted fabrication of nanostructured tin (β-Sn) arrays for bulk microelectronic packaging devices”, MDPI Open Journal ​ ​“Metals (ISSN 2075-4701)"​, Vol.8 (5), 347, 2018.

 Ashok Kumar Srivastava, Surendra Kumar Dwiwedi,Koh-ichi Sugimoto and Manoj Chopkar, Microstructural and mechanical characterization of Chicken Eggshell-reinforced Al6061 Matrix Composites”, Published in ‘Open Journal of Metals (ISSN: 2164-2761)’ , 2018.

 Ashok Kumar Srivastava and Ashutosh Sharma, Advances in Joining and Welding Technologies for Automotive and Electronic Applications”, Published in ‘American Journal of Materials Engineering and Technology (ISSN: 2333-8903)’, Vol. 5, No. 1, pp7-13, 2017.

 Mahesh Bhiwapurkar , Huzur Saran and S.P. Harsha , Effects of posture and vibration magnitude on seat to head transmissibility during exposure to fore-and-aft vibration”, Accepted in ‘Journal of Low Frequency Noise, Vibration & Active Control (ISSN: 2048-4046)’2017.

 R. K. Sangewar, Experimental Investigation on Heat Transfer Characteristics of different Metallic Fin Arrays, Journal of IE(I), Springer Publisher, Vol. 98, No. 5 pp. 234-243, 2017.

 R. K. Sangewar, Performance Evaluation of an Arbitrary Profiled Vertical Fin in Non Newtonian Medium, Journal of Thermal Engineering and Applications, Vol. 3, No. 3, pp. 23-31, 2016 .

 R. K. Sangewar, Performance Evaluation of Solar Refrigeration System Using the Numerical Methods, Journal of Refrigeration Air Conditioning Heating and ventilation, Vol. 4,No. 1, pp. 23-31, 2017.

 R. K. Sangewar, Prediction of Temperature Distribution of Spine Fins with Arbitrary Profiles, Journal of Enhanced Heat Transfer, Begell House USA, Vol.15, No. 4, pp. 351-359, 2014.

 R. K. Sangewar, Enhancement of Thermal Efficiency Using Hemispherical Protrusions on Solar Air Heaters, International Journal of Energy for a clean Environment, Begell house USA. Vol. 15,No. 1, pp. 19-33, 2014.

 M. K. Bhiwapurkar, V.H. Saran, S.P. Harsha, Effect of whole body vibration exposures, direction and postures on writing performance of train passengers, International Journal of Advances in Vehicle Engineering, Vol. 2, No.1, pp. 29-41, 2016 .

 M. K. Bhiwapurkar, V.H. Saran, S.P. Harsha, Interference in writing performance under whole- body vibration exposure together with subject posture, International journal of vehicle noise and vibration, Vol. 12, No. 2, pp. 182-198, 2016.

 M. K. Bhiwapurkar, V.H. Saran, S.P. Harsha, Seat-to-head transmissibility responses of seated occupants exposed to lateral vibration, International journal of vehicle noise and vibration, Vol. 12 No. 1, 2016.

 S. S. Chakrabarti and P. K. Das, Performance Investigation of Air Washer For Different Psychrometric Conditions, Computational Thermal Sciences, Vol.7, No. 3, pp. 217-230, 2015.

 S. S. Chakrabarti Chakrabartiand L. R. Bhandarkar, A Novel approach to the handling and disposal of Fly Ash, International Journal for Energy and Clean Environment, Vol.7, No. 3, pp.225-240, 2014.

 A. K. Srivastava and Koh-ichi Sugimoto, Microstructure and Mechanical Properties of a TRIP-aided Martensitic Steel, Metallography, Microstructure and Analysis (ASM International)’, Vol. 4 pp. 344–354, 2016.

 A. K. Srivastava, K. Das, S. K. Toor and Koh-ichi Sugimoto, Corrosion Behavior of TiC and (Ti,W)C-Reinforced Fe-17Mn and Fe-17Mn-3Al Austenitic Steel Matrix In Situ Composites, Metallography, Microstructure and Analysis (ASM International’, Vol. 4, pp. 371–380, 2015.

 A. K. Srivastava, K. Das, S. K. Toor and Koh-ichi Sugimoto, Corrosion behaviour of TiC-reinforced Hadfiled Manganese Austenitic Steel matrix in-situ composites, Open Journal of Metals, Vol. 5 pp. 11-17, 2015 .

 A. K. Srivastava, S. K. Pal, P. Saha and K. Das, Experimental investigation of the effect of Working Parameters on Wire Offset in Wire Electrical Discharge Machining of Hadfield Manganese Steel, Journal of Surface Engineered Materials and Advanced Technology’, Vol. 3, pp.295-302, 2014.

 A. K. Srivastava, K. Das, P. Saha, D. Tarafdar, S. K. Pal and P. Saha, Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composites through Neuro-Genetic technique, Applied Soft Computing, Vol. 13, pp. 2065-2074, 2014.

 M. K. Phani, V. Pfahl, M. Büchsenschütz-Göbeler, A. Kumar, W. Arnold and K. Samwer, Conduction Electrons as Dissipation Channel in Friction Experiments at the Metal-Insulator Transition of LSMO Measured by Contact-Resonance Atomic Force Microscopy, Applied Physics Letters, Vol.110, No.5, 053102, 2017.

 M. K. Phani, A. Kumar and V. Shankar, Elasticity mapping of precipitates in nickel based alloys using atomic force acoustic microscopy, Journal of Material Science, Vol. 51, No. 18,pp. 1-14, 2016 .

 M. K. Phani, A. Kumar, W. Arnold and K.Samwer, Elastic stiffness and damping measurements in titanium alloys using atomic force acoustic microscopy, Journal of Alloys and Compounds, Vol. 697, pp. 397 – 406, 2016.

 M. K. Phani, A. Kumar, T. Jayakumar, W. Arnold and K. Samwer, Mapping of elasticity and damping in an α + β titanium alloy using atomic force acoustic microscopy, Beilstein Journal of Nanotechnology, Vol. 6, pp. 767–776, 2015.

 K. K. Mehta , U. Sinha, A. K. Shriwastava, Real Time Implementation for Monitoring Drowsiness Condition of a Train Driver Using Brain Wave Sensor, International Journal of Computer Applications, Vol. 139, No. 9, pp. 25-30, 2016.

 K. K. Mehta , A. Sanjeevni, K. Verma, Multiple object clustering using FCM and K-means algorithms, International Journal of Computational Vision and Robotics, Vol. 6, No 4, pp. 134-137, 2016.

 K. K. Mehta , S. Neware, Finger Knuckle Feature Extraction using Radon like Features, International Journal of Computational Science and Engineering, Vol. 5, No. 2, pp. 134-137, 2014.

 Md. Tanweer Ahmad and Sandeep Mondal, 'Dynamic Supplier Selection Approach for Mining Equipment Company, Journal of Modelling in Management, 18 Sept 2018 (Accepted).

 Dr Aparna Choudhary, S mondal and K Mukherjee ,“Analysis of critical factors influencing the management of green supply chain practice in small and medium enterprises”, International Journal of Logistics Systems and Management 28(2), 2017.

 Dr Pallavi Pandey, Singh S. and Pathak P. ,Factors affecting turnover intention among front end employees in the Indian retail industry. International journal of Human resource development and management, Accepted for publication in ABDC, Category C., 2017.

 Dr Pallavi Pandey, Singh S. and Pathak P. ,Devising retention strategy for front line employees in retail: An application of Analytic Hierarchy Process. International journal of service, economics and management,Accepted for publication in ABDC, Category C., 2017.

 Suresh K. Sahoo and Jagannath Panda, Impact of Corporate Disclosure on investor’s attractiveness, Amity Business Journal, Vol. 6, No 2, pp. 15-19, 2017.

 Suresh K. Sahoo and Pooja Shree Bhuyan, A Comparative Study on Assets Quality of Banks with special reference to Public and Private Sector Banks Operating in India, Journal of Research, Extension and Development, Vol. 5, No. 11, pp. 14-18, 2017.

 Saket Jeswani, Assessment of Employability Skills among Fresh Engineering Graduates: A Structural Equation Modeling Approach, The IUP Journal of Soft Skills, Vol. 10, No. 2, 2016.

 Saket Jeswani, Do Intrinsic Motivation Influence Turnover Intention? Structural Equation Modelling Approach Among Technical Faculty Members, International Journal of Business and General Management, Special Edition, 2016 .

 Dr Aparna Choudhary, S mondal and K mukherjee , “Green Supply Chain Management: Genesis, Trends and Phases, Journal of Applied Economic Sciences.11 (3), 450-460, 2016 .

 Chandan Ghanty , Chaitali M. Mehare, V. Chopra, N. S. Dhoble & S. J. Dhoble, “Luminescence characteristics of O6+ ion beam and γ-ray irradiated Ca9La(PO4)5(SiO4)F2:Eu phosphor”, Radiation Effects and Defects in Solids (Taylor & Francis), 2020 .

 Chandan Ghanty , Chaitali M. Mehare, Yatish R. Parauha, Vibha Chopra, Sudeshna Ray, N. S. Dhoble, S. J. Dhoble, “Tailoring the luminescent properties of Ca9La(PO4)5(SiO4) F2:1 mol%Eu3+ phosphor via doping of chloride, molybdate, vanadate, sulfate, and tungstate ions”, Journal of Materials Science: Materials in Electronics (Springer), 31, 3426,2020 .

 Girish C. Mishra, A.R. Kadama , S.J. Dhoble, “Thermoluminescence study of Eu3+ doped Na2Sr2Al2PO4Cl9 phosphor via doping of singly, doubly and triply ionized ions” Ceramic International (Elsevier), 46, 132, 2020 .

 Ram Sevak Singh, Anurag Gautam, and Varun Rai, “Graphene-based bipolar plates for polymer electrolyte membrane fuel cells”, Frontiers of Materials Science (Springer), 13, 217, 2019 .

 Neeraj Kumar, Anurag Gautam, Ram Sevak Singh , Manoranjan Kumar Manoj, “ Study of B4C/Al-Mg-Si composites as highly hard and corrosion resistance materials for industrial applications, Transactions of Indian Institute of Metals, 72, 2495,2019 .

 Anurag Gautam, Ram Sevak Singh , and Pragya Komal “Future demands for High Field MRI Diagonostic” Journal of Chemical Sciences, 131, 1 2019 .

 Girish C. Mishra, A.R. Kadam, and S.J. Dhoble, “Effect of singly, doubly and triply ionized ions on downconversion photoluminescence in Eu3+ doped Na2Sr2Al2PO4Cl9 phosphor: A comparative study”,Ceremic International (Elsevier),Acceptance 4, October 2019 .

 S. M. Hussain, M. R. Mishra, R. Sharma and G. S. Seth, Numerical and Statistical Analysis of MHD Boundary Layer Nanofluid Flow over an Exponentially Stretching Sheet, International Journal of Heat and Technology, Vol. 36, No. 4, pp. 1163-1173, 2018 .

 A. Gautam, and P. Komal “Probable ideal size of Ln3+-based upconversion nanoparticles for single and multimodal imaging” Coord. Chem. Rev. 376, 393, 2018.

 Saumya Singh and M. Darus On some new classes of Bi-univalent functions, Journal of Applied Mathematics, Statistics and Informatics, Vol. 14, No. 2, 2018 (To be appeared).

 M. R. Mishra, S. M. Hussain, R. Sharma and G. S. Seth, Effect of heat absorption on Cu-water based magneto-nanofluid over an impulsively moving ramped temperature plate, Bulgarian Chemical Communications, Vol. 50, No. 4, pp. 621-630, 2018 .

 S. M. Hussain, R. Sharma and G. Mishra, Soret and Dufour effects on viscoelastic radiative and heat absorbing nanofluid driven by a stretched sheet with inclined magnetic field, Defect and Diffusion Forum, Vol. 388, pp. 223-245, 2018.

 S. M. Hussain, J. Jain, G. S. Seth, M. M. Rashidi, Effect of Thermal Radiation on Magneto-Nanofluids Free Convective Flow over an Accelerated Moving Ramped Temperature Plate, Scientia Iranica B, Vol. 25, No. 3, pp. 1243-1257, 2018.

 G.C. Mishra, Ashok Kumar Srivastava, Surendra Kumar Dwiwedi ,S. J. Dhoble, and R. S. Kher, “Study of Lyoluminescence of gamma-irradiated GdCa4O(BO3)3:Ce phosphors: Mass of solute and pH of solvent as a key factor”, Published in ‘Optik (ISSN: 0030-4026)’, Vol.158, pp826-830, 2018.

 S. M. Hussain, H. J. Joshi ,G. S. Seth, Radiation Effect on MHD Convective Flow of Nanofluids over an Exponentially Accelerated Moving Ramped Temperature Plate. In: Singh M., Kushvah B., Seth G., Prakash J. (eds) Applications of Fluid Dynamics, Lecture Notes in Mechanical Engineering. Springer, Singapore, 2018.

 S. M. Hussain,R. Sharma, H. Joshi and G. S. Seth, Analysis of Radiative Magneto-Nanofluid over an Accelerated Plate in a Rotating Medium with Hall Effects, Diffusion Foundations, Vol. 11, pp 129-145, 2017.

 S. M. Hussain, J. Jain, G. S. Seth and M. M. Rashidi, Free Convective Heat Transfer with Hall effects, Heat Absorption and Chemical Reaction over an Accelerated Moving Plate in a Rotating System, Journal of Magnetism and Magnetic Material, Vol. 422, pp. 112–123, 2017

 S. M. Hussain, , R. Sharma, M. K. Mishra and G. S. Seth, Radiative magneto-nanofluid over an accelerated moving ramped temperature plate with Hall effects, Journal of Nanofluid, Vol. 6, No. 5, pp. 840-851, 2017 .

 S. M. Hussain, J. Jain and G. S. Seth, Hall effects on MHD Natural Convection Flow with Heat and Mass Transfer of Heat Absorbing and Chemically Reacting Fluid past a Vertical Plate with Ramped Temperature and Ramped Surface Concentration, Bulgarian Chemical Communications. Vol. 48, No. 4, pp. 659-670, 2016 .

 S. M. Hussain, G. S. Seth and S. Sarkar, Hydromagnetic Natural Convection Flow with Heat and Mass Transfer of a Chemically Reacting and Heat Absorbing fluid past an Accelerated Moving Vertical Plate with Ramped Temperature and Ramped Surface Concentration through a Porous Medium, Journal of Egyptian Mathematical Society, Vol. 23, No. 1, pp. 197-207 2015.

 S. M. Hussain, and G. K. Mahato, Effects of Hall Current and Rotation on Hydromagnetic Natural Convection Flow with Heat and Mass Transfer of a Heat Absorbing Fluid Past an Impulsively Moving Vertical Plate with Ramped Temperature, Journal of Applied Fluid Mechanics, Vol. 8, No. 1, pp. 159-171, 2015 .

 S. M. Hussain, G. S. Seth and S. Sarkar,Hydromagnetic oscillatory Couette flow in a rotating system with induced magnetic field, Applied Mathematics and Mechanics, Vol. 35, No. 10, pp. 1331-1344, 2014 .

 S. M. Hussain, G. S. Seth and S. Sarkar Effects of Hall Current, Radiation and Rotation on Natural Convection Heat and Mass Transfer Flow past a Moving Vertical Plate, Ain Shams Engineering Journal, Vol. 4, No. 2, pp. 489-503, 2014 .

 S. M. Hussain, G. S. Seth and S. Sarkar, Effects of Hall Current and Rotation on MHD Natural Convection Flow with Heat and Mass Transfer past an Impulsively Moving Vertical Plate in the Presence of Radiation and Chemical Reaction, Bulgarian Chemical Communications, Vol. 46, No. 4, pp. 704-718, 2014.

 S. M. Hussain, G. S. Seth and S. Sarkar, Hydromagnetic natural convection flow with radiative heat transfer past an accelerated moving vertical plate with ramped temperature in a porous medium, Journal of Porous Media, Vol. 17, No.1, pp. 67-79, 2014 .

 S. M. Hussain, G. S. Seth and R. Sharma, Hall effects on unsteady MHD natural convection flow of a heat absorbing fluid past an accelerated moving vertical plate with ramped temperature, Emirates Journal for Engineering Research, Vol. 19, No.2, pp. 19-32, 2014.

 S. M. Hussain, G. S. Seth, R. Sharma and S. Sarkar, Hall effects on unsteady MHD natural convection flow of a heat absorbing and radiating fluid past an accelerated moving vertical plate with ramped temperature, International Journal of Energy & Technology, Vol. 6, No.12, pp. 1-13, 2014 .

 R. Sharma , G. S. Seth and B. KumbhakarHydromagnetic Flow of Heat Absorbing and Radiating Fluid over Exponentially Stretching Sheet with Partial Slip and Viscous and Joule Dissipation, Engineering Computations,Vol. 33, No. 3, pp. 907-925 2016.

 R. Sharma , G. S. Seth and B. Kumbhakar, Effects of Hall Current on Unsteady MHD Convective Couette Flow of Heat Absorbing Fluid Due to Accelerated Movement of One of the Plates of the Channel in a Porous Medium,Journal of Porous Media, Vol. 19, No. 1, pp. 13-30, 2016 .

 R. Sharma , G. S. Seth and B. Kumbhakar, Heat and Mass Transfer Effects on Unsteady MHD Natural Convection Flow of a Chemically Reactive and Radiating Fluid through a Porous Medium Past a Moving Vertical Plate with Arbitrary Ramped Temperature,Journalof Applied Fluid Mechanics, Vol. 9, No. 1, pp. 103-117, 2016.

 R. Sharma , G. S. Seth and B. Kumbhakar, Unsteady Hydromagnetic Natural Convection Flow Of A Heat Absorbing Fluid Within A Rotating Vertical Channel In Porous Medium With Hall Effects,Journal of Applied Fluid Mechanics, Vol. 8,No. 4, pp. 767-779, 2015 .

 R. Sharma , G. S. Seth and S. Sarkar, Natural convection heat and mass transfer flow with Hall current, rotation, radiation and heat absorption past an accelerated moving vertical plate with ramped temperature, Journal of Applied Fluid Mechanics, Vol. 8, No. 1, pp. 7-20, 2015.

 R. Sharma , G. S. Seth and R. Tripathi, MHD Double Diffusive Natural Convection Flow over Exponentially Accelerated Inclined Plate, Journal of Mechanics, Vol. 33, No. 2, pp. 613-629, 2017 .

 R. Sharma , G. S. Seth and R. Tripathi, Effects of a Heat Absorbing, Radiating and Rotating Fluid over an Exponentially Accelerated Moving vertical Plate with Ramped Temperature, Bulgarian Chemical Communications,Vol. 48, No. 4, pp. 770-778, 2016.

 G. C. Mishra, K. K. Satapathy, S. J. Dhoble and R. S. Kher, Urea Assisted Self Combustion Synthesis of CaAl2O4: Eu Phosphor And Its Mechanoluminescence Characterization,NJC: Royal Society of Chemistry, Vol. 41, pp. 2193-2197, 2017 .

 K. K. Satapathy, G. C. Mishra, R. S. Kher and S. J. DhobleMechanoluminescence and thermoluminescence characterization of Tb3+ doped CaAl2O4: a theoretical and experimental study, RSC Advance: Royal Society of Chemistry,Vol. 5, pp. 79391-79396, 2015.

 K. K. Satapathy, G. C. Mishra, Preparation Route, characterization and Dose measurement of MAl2O4 (M=Ba, Ca, Mg) phosphors activated with Dy3+, Journal Of Optoelectronics and Advanced Materials,Vol. 17, No. 5-6, 2015 .

 K. K. Satapathy, G. C. Mishra and F. Khan, ZnAl2O4:Eu novel phosphor: SEM and Mechanoluminescence characterization synthesized by solution combustion technique, LUMINESCENCE: The journal of Biological and Chemical Luminescence, Vol. 30, pp. 564-567, 2015 .

 K. N. Singh, P. K. Bajpai and M. Pastor , Diffuse Phase Transition and Electrical Conductivity in Pb (Ca1/3Nb2/3)O3, Journal of Electronic Materials, Vol. 43, pp. 1403, 2014.

 K. N. Singh, V. Sao and P. K. Bajpai, Structural and Raman Spectroscopic Study of Antimony Doped Bi0.5Na0.5TiO3 Electroceramic, Journal of Materials Science and Chemical Engineering. Vol. 3, pp. 43-49, 2015 .

 K. N. Singh, P. Tamrakar and P. K. Bajpai, Relaxor behaviour and dielectric relaxation in Lead-free solid solution (1-x)(Bi0.5Na0.5TiO3)─x(SrNb2O6), Journal of Electronic Materials, Vol. 45, No. 2, pp. 928-939, 2016.

 K. N. Singh S. Agrawal, U. Shrivastava and P. Sharma, Dielectric characterization of Pb (Ni1/3Nb2/3)O3 multiferroic material, Indian Journal of applied research, Vol. 6 No. 3,pp. 335-337, 2016 .