Assistant Professor: Joined OP Jindal University, Raigarh (C.G) in August 2022.
Worked as a Research Associate at Department of Metallurgical and Materials Engineering, National Institute of Technology Raipur from Jan 2022 to August 2022.
Sanjeev Das, Prasenjit Biswas “A novel apparatus to continuously cast particulate reinforced metal matrix composite (MMC) (either ex-situ or in-situ) and to introduce grain refiner/ modifiers effectively in any alloy system”, Patent application no- 201924004454, filed on Jan 2019, (Published and FER Submitted)
Design patent, Sanjeev Das, Deepak Patel, Prasenjit Biswas “Semi-Continuous vertical direct chill casting simulator”, application no- 366792-001, filed on Jun 2022, (Accepted for grant)
Arjun Kundu, Prasenjit Biswas, Archana Mallik, Sanjeev Das, “Electromagnetic Twin-Roll Casting of Aluminium Alloy Sheets: An Overview” JOM (The Journal of The Minerals, Metals & Materials Society (TMS) (2022). https://doi.org/10.1007/s11837-022-05490-y.
Prasenjit Biswas, Deepak Patel, Archana Ojha, Sanjeev Das, “Concept development, design, and validation of a novel continuous casting equipment” World Journal of Engineering, 2022, (Accepted Manuscript).
Rupesh Kumar Verma, Prasenjit Biswas, Manoj Chopkar, “Simulation and Experimental Investigation of Centrifugal-Cast Functionally Graded Aluminum-B4C composite”, Materials and Manufacturing Processes, 2022, (Accepted Manuscript).
Chandan Choudhary, Anand Kumbhare, Prasenjit Biswas, Anil M. Bisen, “Investigation of effect of the rheological parameters on the flow behavior of ADC12 Al alloy in Rheo Pressure Die Casting”, International Journal of Metal Casting, 2022, (Accepted manuscript).
Prasenjit Biswas, Santosh Mishra, Mrinal Sahu, Archana Mallik and Sanjeev Das; “Simulation based optimization of geometrical factors and process parameters for a continuous caster to fabricate Aluminium based MMC”; International Journal of Metal casting, https://doi.org/10.1007/s40962-021-00705-5.
Prasenjit Biswas, Amrik Kundu, Hiren R. Kotadia, Archana Mallik, Sanjeev Das, “Design and manufacturing of a novel continuous casting technique for the addition of ceramic particulate reinforcement, alloying elements and grain refiners in Al-system” CIRP Journal of Manufacturing Science and Technology, https://doi.org/10.1016/j.cirpj.2020.06.009, Volume 31, November 2020, Pages 342-350.
Prasenjit Biswas, Joydeep Maity, “An Investigation on Divorced Eutectoid Growth of Cementite In Eutectoid Steel”, Arch. Metall. Mater. 65 (2020), 3, 1171-1176, DOI: 10.24425/amm.2020.133235.
Prasenjit Biswas, Deepak Patel, Anil Kumar, Aaryan Bagani, Pranjal Soni, Hiren R. Kotadia, Sanjeev Das, “A Study on interfacial activities between Nb and liquid Al in static and dynamic condition”, Materials Today: Proceedings, Volume 27, Part 3, 2020, Pages 2880-2885, https://doi.org/ 10.1016/j.matpr.2020.01.611
Prasenjit Biswas, Deepak Patel, Amrik Kundu, Shashank Poddar, Arjun Kundu, Archana Mallik, Sanjeev Das, “Production and characterization of Al- Cu Binary Alloy produced by using Novel Continuous Casting Process” International Journal of Material Research (Accepted Manuscript).
Abhinav Saxena, Martha Indriyati, Rajveer, Prasenjit Biswas, Hiren R. Kotadia Sanjeev Das, “Tribological behaviour of hot extruded Al–Cu–Mg–Ag alloy reinforced by TiB2 particles”, Materials science and technology, 2019, Pages 953-961, DOI: 10.1080/02670836.2019.1598002.
Anil Kumar, Digvijay Parganiha, Jageshwar Verma, Prasenjit Biswas, A. Basu & Manoj Chopkar, “On the synthesis and characterisation of novel composite-structured high-entropy alloys”; Philosophical Magazine Letters; 2019; 302-308, https://doi.org/10.1080/09500839.2019. 1671995.
Arjun Kundu, Deepak Patel, Prasenjit Biswas, Shikhar Ranjan, Archana Mallik, Sanjeev Das “Design of Electromagnetic TP-1 Test Equipment to Study the Change in Aluminium Macrostructure Under External Field”; Trans Indian Inst Met (2021) 74(7):1819–1826, https://doi.org/10.1007/s12666-021-02269-8.
Deepak Patel, Amrik Kundu, Arjun Kundu, Prasenjit Biswas, Hiren R. Kotadia, Archana Mallik & Sanjeev Das; “In-house design of forced convection direct chill casting simulator for casting immiscible Al-Sn alloys”; international journal of cast metals research; https://doi.org/10.1080/13640461.2021.1970937.
Deepak Patel, Prasenjit Biswas, Anil Kumar, Hiren R. Kotadia, Archana Mallik, Sanjeev Das; “On the Prediction of Grain Refinement Mechanism in Direct Chill Casting of Aluminium and its Alloys Under Low Degree Mechanical Forced Convection”; Metals and Materials International, DOI: 10.1007/s12540-021-01048-w.
Deepak Patel, Prasenjit Biswas, Archana Mallik, Sanjeev Das, “Synthesis of Al-Sn Alloys by Direct Chill Casting under the effect of Mechanical stirring: An Experimental and Simulation Optimization Study” International Journal of Materials Research (Accepted Manuscript)
Interfacial activities between Nb and liquid Al in static and dynamic condition- International Conference on “Materials and Manufacturing Method” National Institute of Technology Trichy, India, 2019.
Al- Cu Binary Alloy produced by using Novel Continuous Casting Process: Processing and Characterization- International Conference on “Processing and Characterization of Materials” National Institute of Technology Rourkela, India, 2022.
Optimization of casting parameters of a novel continuous casting setup by using Ansys CFD software- International Conference on “Advances in Materials Processing” National Institute of Technology Raipur, India, 2022.
Simulation and optimization of Stir casting for producing Al-SiC MMC- National conference on “Challenges and Opportunities in Indian Industries”, National Institute of Technology Raipur, India, 2019.
