Working as an Associate Professor at O.P. Jindal University, Raigarh (C.G), from September 2021, till date.
Worked as Assistant Professor in Mechanical Engineering Department at Ajay Kumar Garg Engineering College, Ghaziabad since 21st September, 2017 to August 2021.
Worked as an Assistant Professor in Mechanical Engineering Department at Shri Shankaracharya Institute of Technology and Management, Bhilai since 23rd July, 2015 to 04th September, 2017.
Worked as an Assistant Professor in Mechanical Engineering Department at Meerut Institute of Engineering & Technology, Meerut from 31st July, 2014 to 15th July, 2015.
Worked as a Lecturer in Mechanical Engineering Department at GD Rungta College of Engineering & Technology, Bhilai from 23rd January, 2009 to 4th July, 2009.
Patent Application No-IN202011044209, Title-DEVICE AND METHOD FOR REMOVING INK FROM PAPER, Date of Filing-10/10/2020, Applicant-Ajay Kumar Garg Engineering College, Inventors-Dr. Umesh Kumar Vishwakarma, Divyanshu Paliwal, Anushree Asthana, Aman Gupta, Anurag Kumar Yadav, Adarsh Kumar Verma.
Vishwakarma, Umesh, Dvivedi, Akshay and Kumar, Pradeep (2013), “Finite Element Modeling of Material Removal Rate in Powder Mixed Electrical Discharge Machining of Al-SiC Metal Matrix Composites”, in Materials Processing Fundamentals (eds L. Zhang, A. Allanore, C. Wang, J. A. Yurko and J. Crapps), John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9781118662199.ch17.
Mukesh Sharma, Amit Alexander, Shailendra Saraf, Swarnlata Saraf, Umesh Kumar Vishwakarma, Kartik T. Nakhate, Ajazuddin, Mosquito repellent and larvicidal perspectives of weeds Lantana camara L. and Ocimum gratissimum L. found in central India, Biocatalysis and Agricultural Biotechnology, Volume 34,2021,102040,ISSN 1878-8181,https://doi.org/10.1016/j.bcab.2021.102040.
Vishwakarma, Umesh Kumar, Dvivedi, Akshay and Kumar, Pradeep, (2014), “Comparative Study of Powder Mixed EDM and Rotary Tool EDM Performance during Machining of Al-SiC Metal Matrix Composites”. International Journal of Machining and Machinability of Materials, Vol. 16, Issue 2, Pages 113-128.
Vishwakarma, U. K., Dvivedi, A., Kumar, P. and Biswas, S. (2013), “Parametric Investigation of Rotary Electrical Discharge Machining of Al-SiC Metal Matrix Composites Using Taguchi Method”, International Journal of Advances in Management, Technology & Engineering Sciences, Vol. 2, Issue 6, Pages 116-120.
Vishwakarma, U. K., Dvivedi, A., & Kumar, P. (2012). FEA modeling of material removal rate in electrical discharge machining of Al6063/SiC composites. International Journal of Mechanical and Aerospace Engineering, 6(1), 398-403.
Vishwakarma, U. K., Dvivedi, A. and Kumar, P. (2012), “Finite Element Modeling of Tool Wear Rate in Electrical Discharge Machining,” VIVECHAN International Journal of Research, Vol. 3, pages 25-31.
Vishwakarma Umesh Kumar, Dvivedi Akshay and Kumar Pradeep, (2017), “Finite Element Simulation of Material Removal Rate in Rotary Tool Electrical Discharge Machining of Copper–Steel, in the proceedings of National Conference on Unconventional Manufacturing Technology (UMT-2017), held on 22-23rd September, 2017 at Ajay Kumar Garg Engineering College, Ghaziabad, Uttar Pradesh.
Janghel, Omprakash and Vishwakarma, Umesh Kumar, (2017), “Friction Stir Welding: Tools and Its Importance”, in the proceedings of Research Challenges in Science, Technology & Management for National Development (BITCON 2017), National Conference held on 28th March, 2017 at BIT Durg, Chhattisgarh.
Dewangan, Satya Kumar and Vishwakarma, Umesh Kumar, (2017), “Development and investigation of Aluminium 6063 Based Graphite and SiC Particle Reinforced metal matrix composites produced by Stir casting”, in the proceedings of Research Challenges in Science, Technology & Management for National Development (BITCON 2017), National Conference held on 28th March, 2017 at BIT Durg, Chhattisgarh.
Vishwakarma, U. K., Dvivedi, A. and Kumar, P. (2012), “Prediction of Material Removal Rate in Powder Mixed Electrical Discharge Machining Using Adaptive Neuro Fuzzy Inference System,” 4th International & 25th AIMTDR Conference 2012, page 67.
Vishwakarma, U. K., Dvivedi, A. and Kumar, P. (2012), “Experimental Analysis of Rotary Tool Electrical Discharge Machining Using Response Surface Methodology,” 2nd Annual International Conference on Materials Science, Metal & Manufacturing (M3 2012), pages 151-154, Doi: 10.5176/2251-1857_M312.66
Vishwakarma, U. K., Dvivedi, A. and Kumar, P. (2012), “Prediction of Material Removal Rate in Rotary Tool Electric Discharge Machining Using Adaptive Neuro-Fuzzy Inference System,” 2nd Annual International Conference on Materials Science, Metal & Manufacturing (M3 2012), pages 155-161, Doi: 10.5d176/2251-1857_M312.63.
Vishwakarma, U. K., Dvivedi, A. and Kumar, P. (2012), "Prediction of Material Removal Rate in Rotary Tool Electrical Discharge Machining of Al6063 SiCp metal matrix composite Using Fuzzy Logics," in the Proceedings of PFAM21, Vol. II, pages 1051-1057.
Biswas, S., Vishwakarma,U. K., Dvivedi, A. and Kumar, D. (2012), “FEA Simulation of Material Removal Rate in Rotary Electro-Discharge Machining of Copper–Steel (En-8),” International Conference on Advances in Manufacturing Technology 2012, Chennai Institute of Technology, June 15-17, 2012.
Arya, R. K., Dvivedi, A., Karunakar, D. B. and Vishwakarma, U. K. (2012), “Modeling of material removal mechanism of EDM for Al6063/SiC metal matrix composite,” International Conference on Advances in Manufacturing Technology 2012, Chennai Institute of Technology, June 15-17, 2012.
Co-convener of National Conference on Mechanical and Automation Engineering 2020 (MAAE 2020) Organized by Mechanical Engineering Department, Ajay Kumar Garg Engineering College, Ghaziabad on 7th and 8th Feb, 2020.
Coordinated one-week Faculty Development Program on Additive Manufacturing (26th Aug, 2019 to 30th Aug, 2019) Organized by Mechanical Engineering Department, Ajay Kumar Garg Engineering College, Ghaziabad.
Attended one-week Faculty Development Program on Manufacturing Process conducted by the Centre for Continuing Education IIT Kanpur from 21st Aug, 2019 to 25th Aug, 2019 funded by TEQIP-III AKTU.
Attended the Eight-day Faculty Development Program on “Universal Human Values and Professional Ethics” conducted by Value Education Cell, AKTU at ABES Engineering college, Ghaziabab from 07th Jan, 2019 to 14th Jan, 2019 organized by TEQIP-III AKTU.
Coordinated one week Faculty Development Program on Automation and Robotics (May 21st, 2018 to May 25th, 2018) Sponsored by Dr. A. P. J. Abdul Kalam Technical University Lucknow, Uttar Pradesh; Organized by Centre of Relevance & Excellence , Mechanical Engineering Department, Ajay Kumar Garg Engineering College, Ghaziabad.
Completed an AICTE approved two-week Faculty Development Programme (FDP201x) on “Pedagogy for Online and Blended Teaching-Learning Process” conducted by Indian Institute of Technology Bombay from May 3rd, 2018 to May 30th, 2018.
Completed an AICTE approved two-week Faculty Development Programme (FDP101x) on “Foundation Program in ICT for Education” conducted by Indian Institute of Technology Bombay from March 8th, 2018 to April 12th, 2018.
Presented a technical paper in a National Conference “Unconventional Machining Processes” at Ajay Kumar Garg Engineering College, Ghaziabad held on 22nd and 23rd September, 2017.
Attended a QIP workshop on “Ultrasonic Machining Approach to Fabrication of Micro-channels” organized by Department of Mechanical & Industrial Engineering, IIT Roorkee on 13th March 2013.
Presented a research article in 2nd Annual International Conference on M3 2012, on 19th -20th November, 2012 at Singapore.
Presented a technical paper in 21st symposium on Processing and Fabrication of Advanced Materials (PFAM) at IIT Guwahati held on 10th -13th December, 2012.
Participated in 7th International Biofuels Conference on 11th and 12th February, 2010 at New Delhi organized by Winrock International India.
